WiNDycj Blog

自從MiNi-ITX盛行後,各家皆有出相關對應機殼,雖說往小發展,但對其擴充性仍覺不足.

機板是越做越強,相對機殼擴充性也應越來越強才對....................

已觀察一陣子,還是覺得去年星野出的這款機殼最符合心中理想機殼.(這時還未入手)

剛好最近好友也興起要組一台HTPC,商量後,買了跟自己最近正在改裝的機殼的機板是一樣的(9300),

而後要組裝的機殼也是找很久,直到最近找到了,並買了,他人生的第一咖-星野機殼  MC3 FX, 並知會在下,

很久無新作品了,現ITX版已臻成熟並廣為流行,剛好符合手上這沉默已久的收藏品,應該是讓它發光發熱的時候到了..........
初暫定位為:‧HTPC-ITX‧水冷排無風扇系統

暫定樣:

引自: XF Forum
( 原圖無修 )

[XF] 亞太區最大宗CPU水冷頭測試   

其眾多作品中,特別喜愛一顆自製的水冷頭,相信,到目前為止,這應是我見過其設計理念最好的一顆水冷頭了.....

如能收入旗下,不知該有多好......

引自: link( Marcellino )

引自: link( Marcellino )

TouchME ( HTPC ) 使用到的相關水冷硬體..................

CPU:

又再度見識到德國人的工藝,真的是沒話說,其設計理念及完成的作品,真是多麼的令人激賞.............

特別mail,徵求原作者(Marcellino)同意,特轉收錄在blog,讓水冷愛好者,能共同觀摩難得一見的純自製的-HTPC.

引自: link( Marcellino )

等那麼久,終於有廠商肯出金屬製品了...........

水路接頭使用上,更加寬廣..................

看不懂德文,猜想,以這家做法,應是鋁製電鍍,而非陽極.......

Introduction
--------------------------------------------------------------------------------

Hi folks, today we provide you with some very special information! As you may have noticed, the layout of the popular Laing DDC-1T water pump was changed. The new revision is characterised by a new impeller and some changes in the PCB design. The DDC-1T (10w) and the DDC-1PlusT (18w) both possess a blue impeller, whose inlet dimensions have changed, too. For the older versions, it was easy to distinguish both water pumps by the color of the impeller. The DDC-1T pump was equipped with a black impeller, the DDC-1plusT with a red one.Further on, there were some differences in the layout of the "old" impellers, but now both versions of the pump share exactly the same impeller. We wanted to take a detailed look at the new DDC-1T and DDC-1PlusT designs: For this purpose, we ordered both water pumps in the new version and we were suprised with what we found out: With just a little effort and a soldering gun + solder, it is possible to change a DDC-1T water pump to a DDC-1plusT. As there will be no high amperage on the contacts we are going to modify, you can do this with some conductive lacquer, too. So we decided to share this information with you and made a short HowTo.

特別徵求 Top Nurse 兄的同意,轉載其開箱解剖文章給大家瞧瞧.以瞭解 Aduaduct 其內部構造.....

重要文獻,特予收錄.

AC Acuaduct :

最近看見 Lian Li 要出一款紀念機種,似乎想通了,為滿足玩家找無陽極廠的窘境,內部已陽極化.

還鑲有紀念mark~ 跟日本 Abee 如出一轍....

最近國外又出了一款新的整線管理裝置...Cable Management

從今年一月開始突然又有了改水冷的念頭 , 於是著手開始收集
配件 , 還到各有關介紹水冷知識的論壇揣摩一番 , 從無到有 ,
花費鉅靡 , 也不曉得到底出走了多少小朋友花了多少精力 , 但

好久不見smatch兄的作品,特擷錄其二則出眾作品,以供觀賞.
-------------------------------------------------------------------------------

冷夜玫瑰 Frozenrose R41 V1 空冷改水冷系統 :

星野機殼另一重點改裝-雛形,由AL佬提供(純手工)..................

重點:

機殼後抽取板之改裝,更動POWER及散熱排之置放位置.........

Aqua新出的水冷頭,今天才見識到其銅底構造,就跟我之前所想的一樣,

絕不會跟cather 做的一模樣,定有其不同構造與想法......

今天收到友站WC-J大製的水箱......品質是還不錯...........

but...不知何時才有國人自創樣式..........

Aqua新出的水冷機殼配置,採用聯力機殼G系列..........
重點是上蓋新樣式護網.

最近國外新出可扺抗UV燈的黑色太空管R3400,真想買回來試試 ^ - ^
型號:
Ø11,2/8 mm Tygon® R3400 UV Resistant Tubing - black

此Pump-控製器目前只有德文,無英文,由圖解大至可瞭解其使用方式:
圖文引自:Aqua
http://www.aqua-computer-systeme.de/cgi-bin/YaBB/YaBB.pl?board=7;action=display;num=1181114846

the aquasuite can handle an infinite amount of controllers. The only limit is your mainboard and its USB controllers. A few hundred poweradjusts would be possible