星野幻影 - WiNDycj

目前日期文章:200707 (2)

瀏覽方式: 標題列表 簡短摘要
Introduction
--------------------------------------------------------------------------------

Hi folks, today we provide you with some very special information! As you may have noticed, the layout of the popular Laing DDC-1T water pump was changed. The new revision is characterised by a new impeller and some changes in the PCB design. The DDC-1T (10w) and the DDC-1PlusT (18w) both possess a blue impeller, whose inlet dimensions have changed, too. For the older versions, it was easy to distinguish both water pumps by the color of the impeller. The DDC-1T pump was equipped with a black impeller, the DDC-1plusT with a red one.Further on, there were some differences in the layout of the "old" impellers, but now both versions of the pump share exactly the same impeller. We wanted to take a detailed look at the new DDC-1T and DDC-1PlusT designs: For this purpose, we ordered both water pumps in the new version and we were suprised with what we found out: With just a little effort and a soldering gun + solder, it is possible to change a DDC-1T water pump to a DDC-1plusT. As there will be no high amperage on the contacts we are going to modify, you can do this with some conductive lacquer, too. So we decided to share this information with you and made a short HowTo.

kinkiyeh 發表在 痞客邦 PIXNET 留言(0) 人氣()

特別徵求 Top Nurse 兄的同意,轉載其開箱解剖文章給大家瞧瞧.以瞭解 Aduaduct 其內部構造.....

重要文獻,特予收錄.

AC Acuaduct :

kinkiyeh 發表在 痞客邦 PIXNET 留言(1) 人氣()