WiNDycj Blog

引自: link( Marcellino )

TouchME ( HTPC ) 使用到的相關水冷硬體..................

CPU:

又再度見識到德國人的工藝,真的是沒話說,其設計理念及完成的作品,真是多麼的令人激賞.............

特別mail,徵求原作者(Marcellino)同意,特轉收錄在blog,讓水冷愛好者,能共同觀摩難得一見的純自製的-HTPC.

引自: link( Marcellino )

等那麼久,終於有廠商肯出金屬製品了...........

水路接頭使用上,更加寬廣..................

看不懂德文,猜想,以這家做法,應是鋁製電鍍,而非陽極.......

Introduction
--------------------------------------------------------------------------------

Hi folks, today we provide you with some very special information! As you may have noticed, the layout of the popular Laing DDC-1T water pump was changed. The new revision is characterised by a new impeller and some changes in the PCB design. The DDC-1T (10w) and the DDC-1PlusT (18w) both possess a blue impeller, whose inlet dimensions have changed, too. For the older versions, it was easy to distinguish both water pumps by the color of the impeller. The DDC-1T pump was equipped with a black impeller, the DDC-1plusT with a red one.Further on, there were some differences in the layout of the "old" impellers, but now both versions of the pump share exactly the same impeller. We wanted to take a detailed look at the new DDC-1T and DDC-1PlusT designs: For this purpose, we ordered both water pumps in the new version and we were suprised with what we found out: With just a little effort and a soldering gun + solder, it is possible to change a DDC-1T water pump to a DDC-1plusT. As there will be no high amperage on the contacts we are going to modify, you can do this with some conductive lacquer, too. So we decided to share this information with you and made a short HowTo.

特別徵求 Top Nurse 兄的同意,轉載其開箱解剖文章給大家瞧瞧.以瞭解 Aduaduct 其內部構造.....

重要文獻,特予收錄.

AC Acuaduct :

最近看見 Lian Li 要出一款紀念機種,似乎想通了,為滿足玩家找無陽極廠的窘境,內部已陽極化.

還鑲有紀念mark~ 跟日本 Abee 如出一轍....